QuadColor RF Controller
INSTRUCTIONS
FOR COLOR-CHANGING
POST TOPS
OPERATION
•When light is turned on, the indicator will display blue.
•When turned off, the indicator will display red.
•When color is selected from the color wheel, the indicator will display the same color.
•When a press/touch operation is invalid (if the light is off), the indicator will display red.
•To extend battery life, if no keys are touched or pressed after a few seconds, the touch wheel will enter sleep state- pressing any key will wake the touch wheel.
SYNCING REMOTE CONTROL
Using the Controller’s Match Key
•Short Press the “Match” Key
•Immediately press the “Zone” Key
•The LED indicator will fast flash a few times meaning the remote has been successfully paired.
To Delete:
•Press and hold the “Match” Key for 5 seconds to delete all matches.
•The LED Indicator will fast flash a few times meaning all matches were successfully deleted.
To Delete:
•Press and hold the “Match” Key for 5 seconds to delete all matches.
•The LED Indicator will fast flash a few times meaning all matches were successfully deleted.
Using Power Restart
•Switch Power off and on – repeat again.
•Immediately short press “Zone” Key 3 times
on a remote.
•3 Light Blinks means remote has
been successfully paired.
To Delete:
•Switch Power off and on- repeat again.
•Immediately short press the “Zone” key 5
times on the remote.
•5 Light Blinks means all matches were
successfully deleted.
To Delete:
•Switch Power off and on- repeat again.
•Immediately short press the “Zone” key 5
times on the remote.
•5 Light Blinks means all matches were
successfully deleted.
SYNCING REMOTE CONTROL
Using the Controller’s Match Key
•Short Press the “Match” Key
•Immediately press the “Zone” Key
•The LED indicator will fast flash a few times meaning the remote has been successfully paired.
To Delete:
•Press and hold the “Match” Key for 5 seconds to delete all matches.
•The LED Indicator will fast flash a few times meaning all matches were successfully deleted.
To Delete:
•Press and hold the “Match” Key for 5 seconds to delete all matches.
•The LED Indicator will fast flash a few times meaning all matches were successfully deleted.
Using Power Restart
•Switch Power off and on – repeat again.
•Immediately short press “Zone” Key 3 times
on a remote.
•3 Light Blinks means remote has
been successfully paired.
To Delete:
•Switch Power off and on- repeat again.
•Immediately short press the “Zone” key 5
times on the remote.
•5 Light Blinks means all matches were
successfully deleted.
To Delete:
•Switch Power off and on- repeat again.
•Immediately short press the “Zone” key 5
times on the remote.
•5 Light Blinks means all matches were
successfully deleted.
Hours
Monday to Friday
8:30am – 5:00pm
Saturday & Sunday
Closed