Large Area Lights
The Metropolitan 3 features a copper-free 443 alloy cast aluminum pole fitter compartment, cast aluminum door frame with drop lens, and a spun aluminum flared hood. The cast hex nut hub (which is part of the fitter/ballast housing) attaches to a 2” threaded pipe. Optional mountings available. The lens is prismatic acrylic with Type III or Type V lighting distribution. Polycarbonate lens is also available.
Download Product Files:
| Model: | MT3-LED-49 |
| Input Voltage |
120~277VAC |
| Wattage | 49 Watts |
| Lumen Output |
6,300 Lm |
| Certifications |
UL 1598 |
| Model: | MT3-LED-98 |
| Input Voltage |
120~277VAC |
| Wattage | 98 Watts |
| Lumen Output |
12,600 Lm |
| Certifications |
UL 1598 |
| Model: | MT3-LED-147 |
| Input Voltage |
120~277VAC |
| Wattage | 147 Watts |
| Lumen Output |
20,400 Lm |
| Certifications |
UL 1598 |
| PC | Button-Eye Photocontrol |
| T3 | Type III Lighting Distribution |
| T5 | Type V Lighting Distribution |
| PLY | Polycarbonate Refractor |
| EXT | Extended Refractor |
CONSTRUCTION
The METROPOLITAN-3 LED features a copper-free 443 alloy cast aluminum pole fitter compartment, cast aluminum door frame with drop lens, a spun aluminum flared hood, and tool-less rotolock lens. All hardware is stainless steel.
LENS
Lens is prismatic acrylic with Type III or Type V lighting distribution. Polycarbonate lens is available.
LED LIGHT ENGINE
We use the Mag-LED light engine with built in lens photometry in an IP-66 rated system. The fixture meets UL-1598 for wet locations. The driver operates from 120-277 volt with an optional 0-10 volt dimming interface.
MOUNTING
The cast hex nut hub (which is part of the fitter/ballast housing) attaches to 2″ threaded pipe. Optional mountings available. (Shown in photo to fit 3” Tenon).
LED LIGHT ENGINE
We use the Mag-LED light engine with built in lens photometry in an IP-66 rated system. The fixture meets UL-1598 for wet locations. The driver operates from 120-277 volt with an optional 0-10 volt dimming interface.
MOUNTING
The cast hex nut hub (which is part of the fitter/ballast housing) attaches to 2″ threaded pipe. Optional mountings available. (Shown in photo to fit 3” Tenon).
FINISH
Standard finish is TGIC acrylic powder coat in MagniBlack. Other colors available from factory on request.
For Any HID Requests please contact the factory.
Dimensions:
Other Products
Hours
Monday to Friday
8:30am – 5:00pm
Saturday & Sunday
Closed