Roadway

Acorn

The Acorn LED is a stylish pedestrian/roadway luminaire that was designed with roadway safety and energy efficiency in mind- providing for evenly distributed lighting with maximum lumen output and minimal glare. Glare reduction and uniformity of light distribution are two factors in reducing high speed roadway accidents.

Download Product Files:

PDF | IES | CAD

LUMEN OUTPUT (98W)

TO 277 VAC

LUMENS / WATT

Model: SA-LED-49
Input Voltage: 120~277VAC
Wattage: 49 Watts
Lumen Output: 6,300 Lm
Certifications: UL 1598
Model: SA-LED-98
Input Voltage: 120~277VAC
Wattage: 98 Watts
Lumen Output: 12,600 Lm
Certifications: UL 1598
T3 Type III Distribution
T5 Type V Distribution
PS Photoreceptacle Only
PST Twist-Lock Photocontrol  Assembly
PLY Polycarbonate Refractor

Download Product Files:

PDF | IES | CAD

CONSTRUCTION

The Acorn has a spun aluminum upper housing, a diffused lower refractor assembly and a cast aluminum fitter for mounting. The refractor/door frame assembly are hinged to the luminaire and secured to an inner cast aluminum ring which is an integral part of the spinning. All hardware is corrosion-resistant. All external hardware is stainless steel.

LENS

The optically clear LED lens is offered in both Type III and Type V distributions. A clear acrylic lens is standard.

LED LIGHT ENGINE

Mag-LED light engine with built-in lens photometry in an IP-66 rated system. The fixture meets UL-1598 standards for wet locations. The driver operates from 120-277 volts with an optional 0-10 volt dimming interface.

MOUNTING

Cast aluminum slipfitter is designed to attach the luminaire to a 2-3/8″ O.D. pole arm. The luminaire is securely fastened with (2) stainless steel allen-head set screws. The top of the fitter can accommodate an optional twist-lock photocontrol in place of the finial supplied.

LED LIGHT ENGINE

Mag-LED light engine with built-in lens photometry in an IP-66 rated system. The fixture meets UL-1598 standards for wet locations. The driver operates from 120-277 volts with an optional 0-10 volt dimming interface.

MOUNTING

Cast aluminum slipfitter is designed to attach the luminaire to a 2-3/8″ O.D. pole arm. The luminaire is securely fastened with (2) stainless steel allen-head set screws. The top of the fitter can accommodate an optional twist-lock photocontrol in place of the finial supplied.

FINISH

Standard finish is TGIC acrylic powder coat in MagniBronze. Other colors available from factory on request.

For Any HID Requests please contact factory.

Dimensions: