POST TOPS
Bayville
The Bayville LED has a spun aluminum dome with reinforced flange to create a sharp cut-off lantern ideally suited for pier and pathway lighting.
Download Product Files:
PDF | IES | CAD
LUMEN OUTPUT (98W)
TO 277 VAC
LUMENS / WATT
| Model: | L4-LED-49 |
| Input Voltage: | 120~277VAC |
| Wattage: | 49 Watts |
| Lumen Output: | 6800 Lm |
| Certifications: | UL 1598 |
| Model: | L4-LED-98 |
| Input Voltage: | 120~277VAC |
| Wattage: | 98 Watts |
| Lumen Output: | 13600 Lm |
| Certifications: | UL 1598 |
| T3 | Type III Lens |
| T5 | Type V Lens |
| SUR | 10KVA Surge Suppressor |
| 3K | 3000K Color Temperature |
| 4K | 4000K Color Temperature |
| PC | Button-Eye Photo Control |
| ARCY | Acrylic Lens |
Download Product Files:
PDF | IES | CAD
CONSTRUCTION
The BAYVILLE LED has a spun aluminum dome with reinforced flange to create a sharp cut-off lantern ideally suited for pier and pathway lighting.The cast aluminum finial and stainless steel threaded stud secures the dome to the cast harp. All hardware is stainless steel and coated with an anti-corrosion compound to prevent seizing. Fixtures are fully gasketed with extruded EPDM rubber to seal the top and bottom of the fixture against water and insect intrusion.
LENS
The optically clear LED lens is offered in both type 3 and type 5 distributions. A clear acrylic lens is standard.
LED LIGHT ENGINE
Mag-LED light engine with built-in lens photometry in an IP-66 rated system. The fixture meets UL-1598 for wet locations. The driver operates from 120-277 volt with an optional 0-10 volt dimming interface.
MOUNTING
Cast aluminum mounting base fits on a 4″ pole tenon and fastens securely to the pole or bracket with stainless steel set screws.
LED LIGHT ENGINE
Mag-LED light engine with built-in lens photometry in an IP-66 rated system. The fixture meets UL-1598 for wet locations. The driver operates from 120-277 volt with an optional 0-10 volt dimming interface.
MOUNTING
Cast aluminum mounting base fits on a 4″ pole tenon and fastens securely to the pole or bracket with stainless steel set screws.
FINISH
Standard finish is a TGIC powder coat in MagniBlack. Other colors are available on request from the factory.
Dimensions:
Other Products
Hours
Monday to Friday
8:30am – 5:00pm
Saturday & Sunday
Closed